IEC 61010

IEC 61010

 
IEC 61010

Company News

E14 Lamp Gauge List

Application:

Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 60 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.


Conforms To:

IEC60968-1, IEC60061-3


Specification:
Standard
Product Name
IEC60061-3,7006-27F-1 "Go"gauges for E14 caps on finished lamps
IEC60061-3,7006-28B-1 "Not Go"gauges for E14 caps on finished lamps
IEC60061-3,7006-54-2 Gauge for finished lamps fitted with E14 caps for testing contact making
IEC60061-3,7006-55-2 Gauge for finished lamps fitted with E14 caps for testing  port. Against acc. Contact Sh.
IEC60061-3,7006-27G-1 "Go"gauges for dimension "S1" of E14 caps on finished lamps
IEC60061-3,7006-25-7 E14"Go"plug gauge for screw threads
IEC60061-3,7006-26-4 E14"Not Go"plug gauge for screw threads of lampholders
IEC60061-3,7006-30-2 E14 plug gauge for lampholders for testing contract making
IEC60061-3,7006-31-4 E14 Gauge for testing contact making and port. Against acc. Contact during insertion
IEC60061-3,7006-30A-1 E14 plug gauge for lampholders with candle shaped shaft for candle lamps for testing contract making
IEC60238 FIG 11 E14 Test Cap for temperature test 14.4 and 19.3 of IEC60238
IEC60238 FIG 13 E14 test cap A

    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60950 IEC 61010 IEC62368 IEC 60601
    TAG:
Test Probe Go Not Go Gauges Spring Impact Hammer Test Pin Probe Test Probe B Test Probe 18 IP Test Probe
 
Lampholder Gauges Lampcap Gauge Test Probe 11 UL Test Finger Probe Test Vessel Rigid Test Finger Impact Testing
test probe