IEC 61010

IEC 61010

IEC 61010

Company News

GX53 GU5.3 Lamp Gauge List


Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 60 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.

Conforms To:

IEC60968-1, IEC60061-3

Product Name
IEC60061-3,7006-142-1 GX53  Go and not go gauge for caps
IEC60061-3,7006-142D-1 GX53  Not go gauge for caps
IEC60061-3,7006-142E-1 GX53  Go and not go gauge for checking keyways in caps
IEC60061-3,7006-142F-1 GX53  Not go gauge for checking keyways in caps
IEC60061-3,7006-109-1 GU5.3  Go and Not go Gauge for Bi-Pin Bases
IEC60061-3,7006-109A-1 GU5.3  Gauges for checking maximum insertion force and maximum withdrawal force in lampholders
IEC60061-3,7006-109B-1 GU5.3  Gauges for checking the minimum retention force in lampholders
IEC60061-3,7006-109C-2 GU5.3  "Go" gauge for lampholders
IEC60061-3,7006-73G-2 GU5.3  Single pin gauge for checking contact making in lampholders

    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60950 IEC 61010 IEC62368 IEC 60601
Test Probe Go Not Go Gauges Spring Impact Hammer Test Pin Probe Test Probe B Test Probe 18 IP Test Probe
Lampholder Gauges Lampcap Gauge Test Probe 11 UL Test Finger Probe Test Vessel Rigid Test Finger Impact Testing
test probe