IEC 61010

IEC 61010

IEC 61010

Company News

UL498 Gauge for Plug & Pin List

Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 60 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.

Conforms To:


Product Name
UL498 Figure 9.1
articulate probe with web stop
UL498 Figure 10.1
UL498 Figure 31.1
flat probe
UL498 Figure 69.1
reference plug
UL498 Figure 94.1
impoper insertion test blades Set of two
UL498 Figure 105.1
test plug Set of two
UL498 Figure 105.2
test blade
UL498 Figure 118.1
receptacle test fixture
UL498 Figure 118.3
push out tool
UL498 Figure 118.5
UL498 Figure 119.1
test pin A
UL498 Figure 119.2
test pin B
UL498 Figure 119.3
57g ground pin
UL498 Figure 119.4
113g ground pin
UL498 Figure 129.2
No.14 AWG test pin
UL498 Figure 132.1
test probe
UL498 Figure 132.2
test probe
UL498 Figure 144.2
fixture for assembly security test
UL498 Figure SD13.2
over size ground pin

    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60950 IEC 61010 IEC62368 IEC 60601
Test Probe Go Not Go Gauges Spring Impact Hammer Test Pin Probe Test Probe B Test Probe 18 IP Test Probe
Lampholder Gauges Lampcap Gauge Test Probe 11 UL Test Finger Probe Test Vessel Rigid Test Finger Impact Testing
test probe