IEC 61010

IEC 61010

IEC 61010

Company News

B15 Lamp Gauge List


Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 60 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.

Conforms To:
IEC60968-1, IEC60061-3

Product Name
IEC60061-3,7006-10-8 "Not Go"gauges for caps on finished lamps BA9,B15,B22&BY22d
IEC60061-3,7006-11-8 "Go"gauges for caps on finished lamps BA9,B15,B22&BY22d
IEC60061-3,7006-4A-2 B22 or B15 Diametrical position of the pin Insertion in lampholder
IEC60061-3,7006-4B-1 B22or B15 Diametrical position of the pin Retention in lampholder
IEC60061-3,7006-12D-2 B15  “Not Go”/retention gauge for lampholders
IEC60061-3,7006-12C-2 B15  Supplementary “Go” gauge for lampholders
IEC60061-3,7006-13-5 B15  Gauges for the slots in lampholders
IEC60061-3,7006-15B-1 B15  Gauges for checking contact position and contact force in bayonet lampholders

    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60950 IEC 61010 IEC62368 IEC 60601
Test Probe Go Not Go Gauges Spring Impact Hammer Test Pin Probe Test Probe B Test Probe 18 IP Test Probe
Lampholder Gauges Lampcap Gauge Test Probe 11 UL Test Finger Probe Test Vessel Rigid Test Finger Impact Testing
test probe