contact us
IEC 60061 7006-11C-1 BAZ15d Go Gauge for Cap on Finished Lamps
products
- Main Products
- IEC Test Probe
- UL Test Probe
- Material Flammability Tester
- IP Code Tester
- Impact Test Apparatus
- Security Testing Machine
- Lamp Cap Gauge Tester
- Lampholders Gauge Tester
- Plug & Socket Tester
- Electrical Safety Tester
- LED Test Instruments
- Environmental Test Equipment
- Instrument Accessories
- Weighing Sensor
- Others Testing Equipment
technical articles
Fun ptoduct
- IEC 60061 7006-11C-1 BAZ15d Go Gauge for Cap on Finished Lamps
- Item LX-11C-1
BAZ15d Go Gauge for Cap on Finished Lamps
According to standard IEC 60061-3
PURPOSE: To check dimensions A max., D1 min., D1 max., L max. and the angular displacement of the pins of caps BAZ15d on finished lamps.
TESTING:
a) To check dimension A max. and the angular displacement of the pins.
With the cap entering the gauge at surface W and the pins locating in the slots provided, it shall be possible to insert the cap to such a depth that the reference (lower) pin is below surface Y.
To check this, the cap is rotated in the appropriate direction until the pin is visible in the cutaway.
b) To check dimensions D1 min. and D1 max.
At he successful completion of the test to check dimension A max. in a) above and with the cap still in the gauge, a pull is applied to the cap to bring the upper surface of the reference pin into contact with surface Y. With the cap in this position, the contact making surfaces shall be co-planar with or project beyond suface X but they shall not project beyond surface Z.
c) To check dimension L max.
With the cap held in the gauge as in b) above with the reference pin visible in the cutaway, the cap is rotated slowly while under tension until the reference pin is not visible in the cutaway.
During the transition, no obstruction to rotation shall be felt.
Shenzhen Julixing Instruments Co., Ltd. are specialized in manufacturing
special, custom built, test and measuring equipment for products testing as per international norms and
offering calibration services and related information. Our products and services are used by research & development
establishments, test laboratories, defense establishments, government institutions & manufacturing industries to fulfill the clients'
requirements.
If you require equipment to
test products such as home appliances, electrical accessories like switches, sockets, connectors, etc.
industrial & road lighting luminaires, automobile lighting systems or related
categories, we can provide the solutions you need.
We would appreciate your comments on the layout design,
presentation or other aspects of our website.
Website: https://www.iec61010.com
Contacts: Eason Wang
E-mail: sales@china-item.com
TEL: +86-755-33168386
Phone: +86-13751010017
SKYPE: carlisle.wyk
TradeManager: cn112384072
Address: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China
ZIP: 518102
Website: https://www.iec61010.com/
